Ajmer and Kishangarh weighbridges for marble blocks, slabs and RIICO units.
Ajmer district holds one of the largest marble trading markets in India. Kishangarh's gangsaw units cut marble and granite blocks brought from Makrana, Rajsamand and other quarries, and its slab traders send finished stone across the country. Ajmer city has the RIICO industrial areas at Palra and Parbatpura, the mandis at Ajmer, Kishangarh and Kekri trade grain and pulses, and NH 48 from Jaipur carries heavy traffic through Kishangarh. Symphony supplies weighbridges, truck scales and dharam kanta or tol kanta (धर्म कांटा / तौल कांटा) across Ajmer district.
A Kishangarh gangsaw unit needs an 80 MT weighbridge (dharam kanta or tol kanta) with a 16–18 m concrete (RCC) or steel-cum-RCC deck for block trailers in and slab trucks out; a slab trader 60 MT on 18 m, and a RIICO unit in Ajmer 40–60 MT on 16 m. Symphony builds the truck scale in Ahmedabad.
Blocks by the tonne, slabs by the foot: the slip records the tonnes.
- Every block on the slipSMFW records the weight of every block trailer by party, so the unit's own recovery calculation starts from a printed weighbridge figure.
- Slurry kept off the cellsSealed IP67/IP68 load cells and a deck sited away from the gangsaw water keep readings clean where slurry dries hard.
- Freight that matches the slipSlab trucks are weighed before dispatch, so the transporter's freight and the buyer's papers start from one printed weight.
Who needs one in Ajmer: Marble and granite processing (gangsaw units), slab and tile trading at Kishangarh, engineering, mineral-based and manufacturing units in the RIICO industrial areas at Palra, Parbatpura and Kishangarh, grain and pulse trade at the Ajmer, Kishangarh and Kekri mandis, and highway transport on the Jaipur–Ajmer corridor.
Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Kishangarh, Nasirabad, Kekri, Pushkar, Sarwar.
Gangsaw units, slab traders and RIICO industry.
Gangsaw and marble processing units
Blocks from Makrana, Rajsamand and other quarries are bought by the tonne and cut into slabs sold by area, so the unit's recovery is only as good as the block weight.
Our setup: An 80 MT concrete (RCC) or steel-cum-RCC deck of 16–18 m, sited away from the slurry drain, with SMFW slips by party for every block trailer.
Slab, tile and stone traders
Kishangarh's traders dispatch slab bundles across India and freight is charged by the tonne; a printed weight before dispatch settles freight questions early.
Our setup: A 60 MT, 18 m pit-less steel deck for long A-frame trucks, with slips that carry the vehicle number, party and challan field.
RIICO units at Palra and Parbatpura
Raw material comes in on full trucks and finished goods leave on smaller ones, and the store matches every truck to its invoice.
Our setup: A 40–60 MT, 16 m pit-less steel deck, or a modular deck where the yard is already concrete: no foundation required, it installs within hours on a hard, level surface such as concrete.
- RIICO Industrial Area, Kishangarhmarble and granite processing (gangsaw) units
- RIICO Industrial Area, Palra, Ajmerengineering, mineral-based and manufacturing units
- RIICO Industrial Area, Parbatpura, Ajmersmall manufacturing and processing units
Gangsaw slurry and summer dust: site the deck dry, seal the cells.
In Kishangarh the weighbridge sits between two units of measure. Marble blocks are bought by the tonne, slabs are sold by the square foot, and freight to buyers in other states is charged by the tonne; the gap between block tonnes in and slab area out is the unit's recovery, so the block weight on the slip has to be right. A block puts its whole weight on a short length of the trailer bed, and slab bundles stand upright on A-frames, so a heavy-duty deck with capacity headroom lasts longer in a stone yard. Gangsaws run on water and leave a fine white slurry that dries into a hard crust, so site the deck where slurry water cannot reach it, keep the gap round it clear and choose sealed IP67/IP68 load cells. In Ajmer's dry, dusty summers, keep the indicator cabin dust-sealed and check the deck gap after dusty spells.
| Recommended for | Vehicles | Capacity | Deck | Type |
|---|---|---|---|---|
| Gangsaw / marble processing unit | Block trailers in, slab trucks out | 80 MT | 16–18 m | Concrete (RCC) or steel-cum-RCC |
| Slab and tile trader | Trucks with A-frame slab bundles | 60 MT | 18 m | Pit-less steel |
| RIICO unit (Palra / Parbatpura) | Trucks, light trailers | 40–60 MT | 16 m | Pit-less steel or modular |
| Highway transporter / public kanta | Multi-axle trucks and trailers | 60–80 MT | 18 m | Concrete (RCC), unmanned option |
Starting points only. Send your heaviest truck and daily traffic and we confirm the size.
From the block trailer at the gate to a printed slip for every block.
Six steps for your project in Ajmer. Most of the waiting is the foundation curing, so the drawing comes first.
- 1 · Your traffic in AjmerTell us the heaviest vehicle you weigh (here, typically block trailers in, slab trucks out), the space at the gate and the daily count. An engineer replies within one working day.
- 2 · Size and quotationOur usual starting point (gangsaw / marble processing unit): 80 MT, 16–18 m deck, Concrete (RCC) or steel-cum-RCC. The quotation comes with the foundation drawing.
- 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the deck arrives.
- 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
- 5 · Installation and calibrationDeck placed, load cells and indicator connected and calibrated, SMFW stored tares set up (RFID, cameras and boom barrier where ordered), and Legal Metrology verification supported.
- 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
Ajmer and Kishangarh marble questions.
Who supplies weighbridges in Ajmer?
Which weighbridge suits a gangsaw unit in Kishangarh?
किशनगढ़ के मार्बल स्लैब व्यापारी के लिए कौन सा धर्म कांटा उपयुक्त है?
Have you supplied heavy-duty weighbridges in Rajasthan?
How soon can a tol kanta be dispatched to Ajmer?
How much does a weighbridge cost in Ajmer?
किशनगढ़ में गैंगसॉ इकाई के लिए धर्म कांटा स्थापित करने से पहले क्या तय करें?
Tell us your site. We recommend the platform.
Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.