Gandhinagar weighbridges for GIDC gates and tenders.
Gandhinagar is the capital district: GIDC units, Kalol and Chhatral factories, and government sites that buy through tenders. Symphony has built weighbridges since 1998 and has supplied Central Railway through GeM.
For a Gandhinagar factory or GIDC unit, a 60 MT pit-less weighbridge with a 16–18 m deck weighs every axle of a multi-axle truck at once. Symphony builds it in Ahmedabad and dispatches about 2 weeks after a commercially cleared order with PO.
Ready for capital tenders: GeM supply experience, drawings on request.
- Built and tested before dispatchDecks are fabricated and tested in Ahmedabad, then delivered and installed on your prepared foundation.
- Tender-ready documentsWe have supplied Central Railway, Bhusawal through GeM, and provide the drawings and test reports departments ask for.
- Service after installationAMC, breakdown visits, calibration and re-stamping support from our Ahmedabad technical desk.
Who needs one in Gandhinagar: GIDC estates in Gandhinagar, the Kalol and Chhatral industrial belt, engineering and plastics units, construction sites and government departments.
Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Kalol, Chhatral, Mansa, Dehgam.
Gandhinagar runs on factories, projects and offices.
GIDC factories
Raw material in and finished goods out both cross the gate, so weighing is your stock control. Mismatched slips and invoices cost money every month.
Our setup: A 60 MT pit-less deck at the gate, with SMFW software printing slips that carry your invoice or challan number; unmanned operation for night shifts.
Construction and infrastructure
Road, building and utility projects around the capital move sand, aggregate and concrete by tipper, and the site moves when the job ends.
Our setup: A modular weighbridge that bolts together on a hard, level concrete surface and can be shifted to the next project.
Government departments and institutions
Buyers need tender documents, test reports and a supplier who can service the weighbridge for years.
Our setup: Drawings and test reports with the bid; AMC with calibration support and annual re-verification help.
- Gandhinagar GIDC (Sectors 25, 26 and 28)electronics, engineering and light manufacturing
- Kalol GIDCengineering, plastics and chemicals
- Chhatral GIDCpharma, chemicals and engineering
- Santej industrial beltengineering, plastics and warehousing
Gate weighing that matches your invoices.
Most Gandhinagar sites are open, level plots inside GIDC estates, so a pit-less deck on concrete pedestals is the simplest choice: no pit to dig or drain. Where the gate area is tight, a pit-type deck sits flush with the road. Government buyers usually need drawings and test reports with the bid; we supply both.
| Recommended for | Vehicles | Capacity | Deck | Type |
|---|---|---|---|---|
| GIDC factory gate | Multi-axle truck | 60 MT | 16–18 m | Pit-less steel |
| Construction site | Tippers, mixers | 40–60 MT | 12–16 m | Modular (moves with the job) |
| Government store | Mixed trucks | 40–60 MT | 12–18 m | Pit-less or pit-type |
Starting points only. Send your heaviest truck and daily traffic and we confirm the size.
From tender to stamped weighbridge.
Six steps for your project in Gandhinagar. Most of the waiting is the foundation curing, so the drawing comes first.
- 1 · Your traffic in GandhinagarTell us the heaviest vehicle you weigh (here, typically multi-axle truck), the space at the gate and the daily count. An engineer replies within one working day.
- 2 · Size and quotationOur usual starting point (GIDC factory gate): 60 MT, 16–18 m deck, Pit-less steel. The quotation comes with the foundation drawing.
- 3 · Foundation on siteYour civil contractor builds it to our drawing; a pit-type deck needs a drained pit with a sump. We can check the levels before the deck arrives.
- 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
- 5 · Installation and calibrationDeck placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
- 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
Gandhinagar buyers ask us this.
Who makes weighbridges near Gandhinagar?
Which weighbridge suits a GIDC factory in Gandhinagar?
Can you quote for government tenders?
How soon can a weighbridge be installed in Gandhinagar?
How much does a weighbridge cost in Gandhinagar?
गांधीनगर में धर्म कांटा कहाँ से लें?
Tell us your site. We recommend the platform.
Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.