Surendranagar weighbridges for salt, cotton and ceramics.
Surendranagar handles cotton, salt, ceramics and stone. Ginning mills, salt works in the Little Rann and quarries all need weighbridges that stand dust and brine. Symphony builds decks for these conditions: concrete (RCC) against brine, sealed IP67/IP68 load cells against dust.
For a Surendranagar salt works, a 60–100 MT concrete (RCC) or steel-cum-RCC weighbridge resists brine far better than painted steel; ginning mills usually choose 60 MT with a 16–18 m deck. Symphony builds it in Ahmedabad.
From the Little Rann to the Thangadh kilns.
- Concrete decks for saltConcrete (RCC) decks resist brine far better than painted steel: our 100 MT steel-cum-RCC weighbridges serve Sambhar Salts in Rajasthan.
- Cotton-season readyFast weighing and printed slips for the heavy truck traffic of the ginning season.
- Stamped and maintainedLegal Metrology stamping support at installation, and an AMC that keeps the kanta accurate between re-verifications.
Who needs one in Surendranagar: Cotton ginning and pressing mills, salt works around Kharaghoda and the Little Rann of Kutch, the Thangadh ceramics cluster, stone quarries, and market yards in Wadhwan, Limbdi and Dhrangadhra.
Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Wadhwan, Limbdi, Dhrangadhra, Thangadh, Kharaghoda.
Salt pans, gins and Thangadh kilns.
Salt works (Kharaghoda, Little Rann)
Brine and salt dust attack paint and welds, and loaded tippers run on soft, salty ground.
Our setup: A concrete (RCC) or steel-cum-RCC deck of 60–100 MT with IP67/IP68 load cells, the same family we built for Sambhar Salts in Rajasthan.
Cotton ginning and pressing
The ginning season brings very heavy truck traffic in a few months.
Our setup: A 60 MT, 18 m pit-less deck for loaded bale and kapas trucks, with slip printing and an AMC check before the season.
Thangadh ceramics
Clay and raw material in, finished ware out, on multi-axle trucks.
Our setup: A 60 MT pit-less deck with dust-sealed load cells for clay yards, and SMFW records matched to dispatch notes.
- Wadhwan GIDCengineering, ceramics and cotton
- Thangadh ceramic clustersanitaryware and ceramics
- Dhrangadhrachemicals, salt and stone
- Kharaghoda salt workssalt production in the Little Rann
Brine is hard on paint. Consider an RCC deck.
Salt is the hardest environment for steel: brine and salt dust attack paint and welds. Concrete (RCC) and steel-cum-RCC decks resist it far better, which is why we built three 16 × 3 m, 100 MT steel-cum-RCC weighbridges for Sambhar Salts Limited in Rajasthan. Cotton mills face a different problem: very heavy traffic in the ginning season, so deck length and fast slip printing matter most.
| Recommended for | Vehicles | Capacity | Deck | Type |
|---|---|---|---|---|
| Salt works | Tippers, multi-axle trucks | 60–100 MT | 16 m | Concrete (RCC) / steel-cum-RCC |
| Ginning / pressing mill | Multi-axle trucks | 60 MT | 16–18 m | Pit-less steel |
| Ceramics (Thangadh) | Multi-axle trucks | 60 MT | 16–18 m | Pit-less steel |
Starting points only. Send your heaviest truck and daily traffic and we confirm the size.
Planned around the ginning season.
Six steps for your project in Surendranagar. Most of the waiting is the foundation curing, so the drawing comes first.
- 1 · Your traffic in SurendranagarTell us the heaviest vehicle you weigh (here, typically tippers, multi-axle trucks), the space at the gate and the daily count. An engineer replies within one working day.
- 2 · Size and quotationOur usual starting point (salt works): 60–100 MT, 16 m deck, Concrete (RCC) / steel-cum-RCC. The quotation comes with the foundation drawing.
- 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the deck arrives.
- 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
- 5 · Installation and calibrationDeck placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
- 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
Salt works and gins, answered.
Who supplies weighbridges in Surendranagar?
Which weighbridge is best for a salt works?
What size suits a ginning mill?
Do you provide AMC and stamping support?
How much does a weighbridge cost in Surendranagar?
सुरेंद्रनगर में नमक उद्योग के लिए धर्म कांटा कैसा हो?
Tell us your site. We recommend the platform.
Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.