Sales +91 94092 42100/Technical +91 97251 68834
Symphony Weighing Leader
Jaisalmer · Rajasthan

Jaisalmer weighbridges for stone, limestone and solar sites.

Jaisalmer, in the Thar desert of western Rajasthan, gives its name to the golden-yellow Jaisalmer stone cut in quarries across the district, and its limestone, including steel-grade limestone from the Sanu area, goes to steel plants, and other grades to cement plants. The open desert also hosts large wind and solar power projects, which bring months of truck traffic in steel, cement and aggregate, while the Jaisalmer and Pokaran mandis trade guar, cumin, bajra and moong. Symphony supplies weighbridges, truck scales and dharam kanta (धर्म कांटा / tol kanta) across Jaisalmer district.

Quick answer

A Jaisalmer stone quarry or limestone mine usually needs an 80–100 MT, 16–18 m weighbridge in concrete (RCC) or heavy pit-less steel; a wind or solar project site a 60–80 MT, 16–18 m modular weighbridge (no foundation required: it installs within hours on a hard, level surface such as concrete); a guar or cumin trader 40–60 MT on 12–16 m, stamped for trade; a public weighbridge 60–100 MT on 16–18 m (dharam kanta). Symphony builds it in Ahmedabad and dispatches it about 2 weeks after a commercially cleared order with PO.

Why Symphony in Jaisalmer

Dense stone, desert sand and project trucks: built for all three.

  • Built for stone and limestone80–100 MT in RCC or heavy steel for dense loads.
  • Ready for project sitesModular: installs within hours on a hard, level surface such as concrete.
  • Made for Thar heat and sandSealed IP67/IP68 load cells, an open gap and a shaded cabin.

Who needs one in Jaisalmer: Jaisalmer yellow-stone quarries, cutting and dressing yards; limestone mining and transport; wind and solar project contractors and their steel, cement and aggregate suppliers; guar, cumin, bajra and moong traders at the Jaisalmer and Pokaran mandis; transporters and public dharam kanta operators.

Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Pokaran, Ramgarh, Fatehgarh, Mohangarh, Bhaniyana.

Get a quotation

Who we build for in Jaisalmer

Quarries, project sites and mandis across Jaisalmer district.

Stone quarries and cutting yards

Yellow-stone blocks are heavy and uneven, and cutting leaves fine dust around the platform.

Our setup: An 80–100 MT, 16–18 m RCC or heavy pit-less steel weighbridge with stoppers, a specified axle rating and sealed IP67/IP68 load cells.

Wind and solar contractors

Steel, cement and aggregate arrive by truck for months, then the work moves to the next project.

Our setup: A 60–80 MT, 16–18 m modular weighbridge: no foundation required, it installs within hours on a hard, level surface such as concrete.

Guar and cumin traders

Seed lots are valuable by the kilogram, so buyer and seller both check the slip.

Our setup: A 40 MT, 12 m stamped pit-less weighbridge, re-verified on time, with SMFW slips by commodity, lot and party.

Industrial areas we serve near Jaisalmer
  • Jaisalmer yellow-stone quarriesbuilding and dressed stone
  • Sanu limestone arealimestone for steel and cement plants
  • Jaisalmer and Pokaran mandisguar, cumin, bajra and moong
  • RIICO industrial area, Jaisalmerstone-cutting and small manufacturing units
  • Wind and solar project zonessteel, cement and aggregate for power projects
Advice for Jaisalmer sites

Heat, blown sand and heavy blocks: sizing a Jaisalmer weighbridge.

Jaisalmer is hard on equipment in three ways. First, stone and limestone are dense: blocks and tipper loads put heavy axle loads on the platform, so quarries and mines should choose 80–100 MT in concrete (RCC) or heavy pit-less steel, with stoppers and a specified axle rating. Second, the Thar sand: wind carries fine sand under the platform and into gaps, so a pit-less weighbridge with an open, sweepable gap and sealed IP67/IP68 load cells and junction boxes stays accurate, while a pit-type one needs regular cleaning. Third, the heat: summer days are extreme, so keep the indicator, printer and computer in a shaded, ventilated cabin. Wind and solar contractors have a different need: weighing steel, cement and aggregate for one project, then moving on. A modular weighbridge suits them: no foundation required, it installs within hours on a hard, level surface such as concrete.

Recommended forVehiclesCapacityWeighbridgeType
Stone quarry / cutting yardBlock trailers, tippers80–100 MT16–18 mRCC or heavy pit-less steel, stoppers
Limestone mineTippers, dumpers80–100 MT16–18 mRCC or heavy pit-less steel
Wind / solar project siteTrucks, trailers60–80 MT16–18 mModular, no foundation required
Guar / cumin trader, public weighbridgeTrolleys, multi-axle trucks40–100 MT12–18 mPit-less steel or RCC, stamped

Starting points only. Send your heaviest truck and daily traffic and we confirm the size.

Your project in Jaisalmer

From the stone block to the cumin lot: six steps in Jaisalmer.

Six steps for your project in Jaisalmer. Most of the waiting is the foundation curing, so the drawing comes first.

  • 1 · Your traffic in JaisalmerTell us the heaviest vehicle you weigh (here, typically block trailers, tippers), the space at the gate and the daily count. An engineer replies within one working day.
  • 2 · Size and quotationOur usual starting point (stone quarry / cutting yard): 80–100 MT, 16–18 m weighbridge, RCC or heavy pit-less steel, stoppers. The quotation comes with the foundation drawing.
  • 3 · Foundation on siteYour civil contractor builds it to our drawing; a pit-type weighbridge needs a drained pit with a sump. We can check the levels before the weighbridge arrives.
  • 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
  • 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
  • 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
FAQ

Questions from Jaisalmer's quarries, contractors and traders.

Who supplies weighbridges in Jaisalmer?
Symphony Weighing Leader (S.M.F. Enterprise), a weighbridge manufacturer in Ahmedabad since 1998, supplies and installs weighbridges across Jaisalmer district, including Pokaran, Ramgarh, Fatehgarh, Mohangarh and Bhaniyana, with Legal Metrology stamping support.
Which weighbridge suits a Jaisalmer stone quarry?
An 80–100 MT, 16–18 m weighbridge in concrete (RCC) or heavy pit-less steel, with stoppers for tippers, a specified axle rating for block trailers and sealed IP67/IP68 load cells against sand and dust.
Which weighbridge suits a wind or solar project site in Jaisalmer district?
A 60–80 MT, 16–18 m modular weighbridge: no foundation required, it installs within hours on a hard, level surface such as concrete, with SMFW slips for every truck of steel, cement or aggregate.
जैसलमेर के पीले पत्थर की खदान के लिए कौन सा धर्म कांटा उपयुक्त है?
पत्थर के भारी ब्लॉक और टिपरों के लिए 80–100 टन क्षमता और 16–18 मीटर लंबाई का RCC या मज़बूत पिट-लेस स्टील धर्म कांटा उपयुक्त है, जिसमें स्टॉपर और सील्ड IP67/IP68 लोड सेल हों। SMFW सॉफ़्टवेयर हर पर्ची पर वाहन और माल दर्ज करता है।
What decides the cost of a weighbridge in Jaisalmer?
Capacity (40 MT for a seed trader, 60–80 MT for a project site, 80–100 MT for a quarry, mine or public weighbridge), length (12–18 m), the type (modular or pit-less steel, pit-type or concrete (RCC)), sand and heat protection, and options such as SMFW records and the unmanned system. Send your heaviest vehicle and daily truck count; an engineer replies within one working day.
जैसलमेर में सोलर या पवन ऊर्जा परियोजना के लिए कौन सा धर्म कांटा उपयुक्त है?
परियोजना स्थल के लिए 60–80 टन क्षमता और 16–18 मीटर लंबाई का मॉड्यूलर धर्म कांटा उपयुक्त है: इसमें नींव की आवश्यकता नहीं होती और यह कंक्रीट जैसी कठोर, समतल सतह पर कुछ ही घंटों में स्थापित हो जाता है। सिम्फनी 1998 से धर्म कांटे बनाता है और स्टैम्पिंग में सहायता प्रदान करता है। कॉल या व्हाट्सएप: +91 94092 42100।

Tell us your site. We recommend the platform.

Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.

Request the document

Fill in your details once; after a quick e-mail verification the download starts and all other documents unlock.

Include the country code, e.g. +91 or +254.
Security characters

An engineer replies within one working day. We verify your e-mail with a one-time code. By sending, you agree to our privacy notice.

Verify us · credentials you can check

Check the papers before you buy.

Quality systemISO 9001:2015
Cert. No.
3050250909104Q
Issued by
QRO Certification LLP
Valid to
8 Sep 2028
Check at qrocert.org
CE certificate of complianceCE-7070
Directive
2014/32/EU
Issued by
UK Certification & Inspection Ltd
Valid to
8 Sep 2028
Check at ukcertifications.org.uk
Legal MetrologyModel approval & manufacturer licence

Symphony holds a Legal Metrology model approval certificate and a manufacturer licence. Copies are shared with your quotation or tender documents.

How stamping works
Business registrationS.M.F. Enterprise
GSTIN
24AJNPK8047K1ZR
MSME
UDYAM-GJ-01-0025143
Since
1998
Tender documents

Ask for any certificate copy with your quotation: info@symphonyweight.com