Sales +91 94092 42100/Technical +91 97251 68834
Symphony Weighing Leader
Miraj · Maharashtra

Miraj weighbridges for foundries, goods-yard dealers and MIDC units.

Miraj weighs its trade at a railway junction, in foundry sheds and at godown gates, though the town is better known across India for its sitars and tanpuras. The junction sends goods towards Pune, Kolhapur and Karnataka, so goods such as cement, fertiliser, steel and grain can move between trucks and wagons, all counted in tonnes. The Miraj and Kupwad MIDC estates run foundries, casting and engineering units that buy pig iron and scrap by weight and sell castings the same way, and the market yards and godowns of the Sangli–Miraj belt move grain and jaggery on trolleys and trucks. A figure printed at the gate is the figure everyone has to agree on. Symphony supplies weighbridges, truck scales and dharam kanta (धर्म कांटा / वजन काटा) to Miraj, Kupwad, Budhgaon, Samdoli and Bedag.

Quick answer

A foundry or casting unit at Kupwad or Miraj MIDC usually fits a 40–60 MT, 14–16 m pit-less steel weighbridge with SMFW slips; a cement, fertiliser or steel dealer loading for the railway goods yard needs 60–80 MT on 16 m so that a full trailer is weighed in one pass; a grain, jaggery or cattle-feed godown fits 40–60 MT on 12–16 m; a building-material or ready-mix yard should plan 60–80 MT on 16 m in concrete (RCC); and a public weighing operator on the highway side can settle on 100 MT on 18 m. Steelwork comes from our Ahmedabad works; the pedestal positions come from our drawing.

Why Symphony in Miraj

Pig iron in, castings out, wagons to load: one printed figure for all three.

  • Planned for the river and the monsoonA pit-less steel platform on raised pedestals keeps load cells and cables clear of standing rain and surface water; on flood-prone ground we advise on site level and junction-box height with your contractor.
  • Dense loads, steady figuresHeavy steel with extra girders and sealed IP68/IP69K load cells holds a steady reading under pig iron, castings and steel sections.
  • One slip for the whole consignmentSMFW prints the vehicle, party and challan field, so the goods-yard desk, the dealer and the transporter work from one printed figure.

Who needs one in Miraj: Foundries, casting and engineering units in the Miraj and Kupwad MIDC estates; pig-iron, scrap and coke suppliers; cement, fertiliser and steel dealers sending goods through the Miraj railway goods yard; grain, jaggery and cattle-feed traders and godown owners; oil and flour mills; plastics and pipe units; building-material, brick and ready-mix suppliers; transporters, loading contractors and public weighing operators.

Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Kupwad, Budhgaon, Samdoli, Bedag, Arag, Mhaisal.

Get a quotation

Who we build for in Miraj

Casting units, grain godowns and dealers across the Miraj and Kupwad belt.

Foundries and casting units

Pig iron and scrap arrive by the truck and castings leave in lots of very different weights, so the figure at the gate also drives the cost of every melt.

Our setup: Our fit: 40–60 MT on 14–16 m, heavy steel with the girders doubled under the wheels.

Railway goods-yard loading

Cement, fertiliser and steel are loaded into wagons from trucks, and a consignment is only as good as the weight on its slip.

Our setup: Our recommendation: a 60–80 MT platform of 16 m with SMFW slips by party and challan.

Grain, jaggery and cattle-feed godowns

Seasonal trade in trolleys and trucks of every size can sit on low ground by the river.

Our setup: Suggested build: 40–60 MT on 12–16 m, pit-less steel on pedestals clear of standing water.

Industrial areas we serve near Miraj
  • Miraj MIDCfoundries, engineering and plastics units
  • Kupwad MIDC, Sangli–Miraj–Kupwadcasting, auto-component and food-processing units
  • Miraj railway goods yard approachcement, fertiliser and steel dealers and loading contractors
  • Godowns and market yards around Mirajgrain, jaggery and cattle-feed storage
Advice for Miraj sites

River floods, black soil and dense loads: where a Miraj weighbridge should stand.

The first thing that sets a Miraj site apart is the river. The Krishna has flooded low-lying parts of Sangli and Miraj in recent monsoons, so for a godown or yard on lower ground we advise, with your contractor, on site level and junction-box height. A pit-less steel weighbridge on pedestals keeps the load cells clear of standing rain and surface water, and a pit is sensible only where drainage has been planned and can be cleaned. Parts of the belt along the Krishna have black soil that swells and shrinks, so we ask for your contractor’s soil note before fixing the pedestal layout, and we mark the pedestals to our drawing. At the railway goods yard the pattern is a steady line of trucks carrying heavy, compact goods such as bagged cement, fertiliser or steel sections, and the figure that matters is the one on the slip that goes with the consignment, so a clear weighbridge with a cabin view of the whole platform and an SMFW slip carrying the vehicle number, party and challan field keeps the loading desk and the transporter in agreement. In a foundry, material comes in as pig iron, scrap or coke and goes out as castings of very different weights: loads are dense and sit on a short length of the bed, so the rating of the platform and the girders under the wheel path decide the choice, not only its length. Tenants in a leased MIDC shed have the modular option, which goes in within hours on a hard, level surface such as concrete. Summer is hot and the monsoon is humid, so IP68/IP69K sealed load cells, a shaded cabin and a sealed junction box are worth specifying from day one.

Recommended forVehiclesCapacityWeighbridgeType
Foundry or casting unitPig iron, scrap and coke in, castings out40–60 MT14–16 mHeavy steel, extra girders where the wheels run
Cement, fertiliser or steel dealer for the goods yardFull trailers of bagged and sectional goods60–80 MT16 mPit-less steel with SMFW slips by party and challan
Grain, jaggery or cattle-feed godownTrolleys and trucks in season, mixed sizes40–60 MT12–16 mPit-less steel on pedestals, clear of standing water
Building-material or ready-mix yardAggregate, brick and mixer trucks60–80 MT16 mConcrete (RCC) or heavy steel for hard axle landings
Engineering or plastics unit in the MIDCRaw material in, finished goods out40–60 MT12–14 mSteel build with the indicator on the stores desk
Public weighing operator on the highway sideWalk-in trucks of every size, weighed for a fee100 MT18 mConcrete (RCC) or heavy steel, approach at both ends

Starting points only. Send your heaviest truck and daily traffic and we confirm the size.

Your project in Miraj

From the soil note to the first printed slip: a Miraj weighbridge in six steps.

Six steps for your project in Miraj. Most of the waiting is the foundation curing, so the drawing comes first.

  • 1 · Your traffic in MirajTell us the heaviest vehicle you weigh (here, typically pig iron, scrap and coke in, castings out), the space at the gate and the daily count. An engineer replies within one working day.
  • 2 · Size and quotationOur usual starting point (foundry or casting unit): 40–60 MT, 14–16 m weighbridge, Heavy steel, extra girders where the wheels run. The quotation comes with the foundation drawing.
  • 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the weighbridge arrives.
  • 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
  • 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
  • 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
FAQ

What Miraj foundry owners, dealers and godown managers ask first.

Who supplies weighbridges in Miraj?
Symphony Weighing Leader (S.M.F. Enterprise) builds its weighbridges in Ahmedabad and has done so since 1998, under a Legal Metrology model approval and a manufacturer licence. Anyone in Miraj, Kupwad, Budhgaon or Samdoli who needs a truck scale deals with the maker directly, and the same team handles the build, the installation and stamping support.
What capacity should a Miraj foundry choose?
Most foundry and casting units settle on 40–60 MT with a 14–16 m platform. Loads are compact and dense, so we also look at the rating of the platform and the girder layout, and we size the build to the heaviest trailer you expect to receive.
Do cement and steel dealers for the railway goods yard need a long platform?
We suggest 16 m at 60–80 MT, so a full trailer is weighed in one pass and not axle by axle. A weighment in one pass is faster at the gate and easier to reconcile with the consignment note.
How does the Krishna flood risk change the plan?
On lower ground we place the platform on pedestals and advise, with your contractor, on site level and junction-box height. We then fix the pedestal layout on a drawing once your contractor shares the soil note and the level of the yard.
Does black soil matter for a Miraj weighbridge?
It can. Black soil swells in the monsoon and cracks in summer, so we ask for the soil note before choosing between pedestals and a poured foundation. A modular weighbridge is also possible only on a sound existing concrete yard.
Can the slip carry the challan number for the goods yard?
Yes. The challan field is part of every SMFW slip, along with the vehicle number and party, and the party-wise report gives a dealer and a transporter one list to check against the wagon loading.
Is a modular weighbridge possible for a leased MIDC shed in Miraj?
Yes, and it is the usual answer for a tenant. Nothing is dug: the platform goes onto a hard, level surface such as concrete within hours, and when the lease is over it can be lifted onto the next plot.
How soon can a Miraj unit start weighing after ordering?
Allow about two weeks from the date the order is commercially cleared with a PO. After that we install, calibrate and support stamping on site. The warranty is one year on the equipment, and a 25-year structural warranty on RCC work (T&C apply).
What decides the cost of a weighbridge in Miraj?
Three choices: how long and how heavy your trailers are (castings and pig iron or bagged cement), what the yard allows (low ground by the river or a raised MIDC plot) and how you want the slip to work. A 40–60 MT, 14–16 m platform for a foundry is a different quote from a 60–80 MT platform of 16 m for a goods-yard dealer. Send us the truck type and the site, and WhatsApp +91 63525 86656 or call +91 94092 42100 for a quotation.
मिरज में फाउंड्री या गोदाम के लिए वेब्रिज चुनते समय क्या देखें?
चयन की शुरुआत उस सबसे भारी ट्रेलर से कीजिए जो आपके गेट पर आता है, फिर माल की किस्म देखिए। फाउंड्री के लिए 40 से 60 टन क्षमता का 14 से 16 मीटर मज़बूत स्टील प्लेटफ़ॉर्म, और रेलवे गुड्स यार्ड भेजने वाले व्यापारी के लिए 60 से 80 टन का 16 मीटर प्लेटफ़ॉर्म सामान्यतः उपयुक्त रहता है। कृष्णा नदी के पास निचली ज़मीन पर स्थल का स्तर और जंक्शन बॉक्स की ऊँचाई ठेकेदार के साथ तय की जाती है। सिम्फनी वर्ष 1998 से अहमदाबाद में निर्माण कर रही है और स्टैम्पिंग सहयोग उपलब्ध कराती है। संपर्क +91 94092 42100।

Tell us your site. We recommend the platform.

Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.

Request the document

Fill in your details once; after a quick e-mail verification the download starts and all other documents unlock.

Include the country code, e.g. +91 or +254.
Security characters

An engineer replies within one working day. We verify your e-mail with a one-time code. By sending, you agree to our privacy notice.

Verify us · credentials you can check

Check the papers before you buy.

Quality systemISO 9001:2015
Cert. No.
3050250909104Q
Issued by
QRO Certification LLP
Valid to
8 Sep 2028
Check at qrocert.org
CE certificate of complianceCE-7070
Directive
2014/32/EU
Issued by
UK Certification & Inspection Ltd
Valid to
8 Sep 2028
Check at ukcertifications.org.uk
Legal MetrologyModel approval & manufacturer licence

Symphony holds a Legal Metrology model approval certificate and a manufacturer licence. Copies are shared with your quotation or tender documents.

How stamping works
Business registrationS.M.F. Enterprise
GSTIN
24AJNPK8047K1ZR
MSME
UDYAM-GJ-01-0025143
Since
1998
Tender documents

Ask for any certificate copy with your quotation: info@symphonyweight.com