Sales +91 94092 42100/Technical +91 97251 68834
Symphony Weighing Leader
Dholka · Gujarat

Dholka weighbridges for bales, pipes, solvents and grain.

Dholka is an old trading town of Ahmedabad district that now runs on two engines: market yards for paddy, grain and vegetables, and the Dholka GIDC estate on the Kheda road, with cotton spinning, pharmaceutical and chemical units, plastic pipe makers and food processors. Bales, yarn, pipes, chemicals and grain move in and out of Dholka on invoices written by weight. Symphony supplies weighbridges, truck scales and dharam kanta (धर्म कांटा) across Dholka taluka.

Quick answer

For a Dholka GIDC spinning mill or pipe maker, a 40–60 MT, 16–18 m pit-less weighbridge (dharam kanta) takes bale trucks and long pipe trailers; a pharma or chemical unit usually needs 40–60 MT on 16 m for tankers and raw-material trucks; a market-yard grain trader 40–60 MT on 16 m. Symphony builds the truck scale in Ahmedabad.

Why Symphony in Dholka

Full by volume before full by weight: size the weighbridge to the trailer.

  • Long enough for pipe trailersEvery wheel of a long PVC pipe trailer must sit on the weighbridge; we size the length to your longest vehicle, not to a catalogue figure.
  • Stores and accounts on one slipSMFW prints gross, tare and net with the GRN or batch number in the challan field, so receipt and invoice match.
  • Built for salt-affected groundFoundation from a soil check, proper curing, painted steel and IP67/IP68 load cells with a sealed junction box.

Who needs one in Dholka: Cotton yarn spinning, pharmaceutical (API) and chemical units, PVC pipe and plastic product makers, food processing and engineering units in the Dholka GIDC estate on the Kheda road; paddy and grain trade at the Dholka market yard; and the Dholka vegetable market yard.

Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Koth, Saroda, Badarkha.

Get a quotation

Who we build for in Dholka

Spinning, pipes, pharma in Dholka GIDC.

Spinning mills in Dholka GIDC

Cotton bales come in and yarn goes out, both billed by weight, and a short bale lot is only found if every truck is weighed on arrival.

Our setup: A 40–60 MT, 16 m pit-less weighbridge with stored tares for the regular transporters and SMFW reports by party for each day's bale arrivals.

PVC pipe and plastic product makers

Pipes travel on long trailers that are full by volume, not weight, and a weighed load checks each dispatch against its invoice.

Our setup: An 18 m pit-less weighbridge where the longest trailer needs it, 40–60 MT, so the whole vehicle sits on the platform for every reading.

Pharma and chemical units

Solvents arrive in tankers and raw materials in bags and drums, and stores must book exactly what the invoice says before production uses it.

Our setup: A 40–60 MT, 16 m pit-less weighbridge at a spot the plant team approves, with the GRN or batch number entered in the challan field of each slip.

Industrial areas we serve near Dholka
  • Dholka GIDC (Kheda road)cotton spinning, pharmaceutical and chemical units, PVC pipes, food processing
  • Dholka market yardpaddy and grain
  • Dholka vegetable market yardvegetable trade
Advice for Dholka sites

Measure the longest trailer before you choose the length.

The trucks that serve Dholka GIDC are unusual in one way: many of them are full by volume before they are full by weight. Cotton bales, yarn cones and PVC pipes fill the body or the trailer long before the axle limit, so length matters as much as capacity. Measure the longest pipe trailer that enters the gate, and choose 18 m if it does not sit fully on a 16 m weighbridge. Pharma and chemical units receive solvents in tankers and raw materials in drums and bags; ask the plant team where a weighbridge may stand on the plot, keeping the indicator and computer outside any marked hazardous area, and enter the batch or GRN number in the challan field of each SMFW slip so stores and accounts read the same weight. Parts of Dholka taluka have salt-affected soil, so the foundation is designed after a soil check, the concrete has proper cover and curing, with the cement type the soil check calls for, and the steel is primed, painted and maintained; IP67/IP68 load cells with a sealed junction box stay dry through the monsoon. A weighbridge used to buy or sell must be verified and stamped by Legal Metrology before use; Symphony gives stamping support.

Recommended forVehiclesCapacityWeighbridgeType
Spinning mill or pipe maker, Dholka GIDCBale trucks, long pipe trailers40–60 MT16–18 m (measure the longest trailer)Pit-less steel
Pharma / chemical unit, Dholka GIDCSolvent tankers, raw-material trucks40–60 MT16 mPit-less steel, placed where the plant team allows
Grain trader, Dholka market yardTractor-trolleys, 2–3 axle trucks40–60 MT16 mPit-less steel

Starting points only. Send your heaviest truck and daily traffic and we confirm the size.

Your project in Dholka

From a plot photo to the first stamped Dholka slip.

Six steps for your project in Dholka. Most of the waiting is the foundation curing, so the drawing comes first.

  • 1 · Your traffic in DholkaTell us the heaviest vehicle you weigh (here, typically bale trucks, long pipe trailers), the space at the gate and the daily count. An engineer replies within one working day.
  • 2 · Size and quotationOur usual starting point (spinning mill or pipe maker, Dholka GIDC): 40–60 MT, 16–18 m (measure the longest trailer) weighbridge, Pit-less steel. The quotation comes with the foundation drawing.
  • 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the weighbridge arrives.
  • 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
  • 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
  • 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
FAQ

Dholka units and traders ask us.

Who supplies weighbridges in Dholka?
Symphony Weighing Leader (S.M.F. Enterprise), a weighbridge manufacturer in Ahmedabad since 1998, supplies and installs weighbridges across Dholka taluka, including the Dholka GIDC estate, Koth and Saroda, with Legal Metrology stamping support.
Which weighbridge suits a spinning mill or PVC pipe unit in Dholka GIDC?
A 40–60 MT pit-less steel weighbridge, 16 m long, or 18 m if your longest pipe trailer does not fit on 16 m. Bale and pipe loads are bulky but often light, so the length of the vehicle decides the weighbridge more than its weight.
How does a pharma or chemical unit in Dholka use its weighbridge?
Each solvent tanker and raw-material truck is weighed in and out, and the net weight is compared with the supplier's invoice before the goods are booked into stores. Stored tares for regular vehicles and the GRN number in the challan field keep the record in one place.
धोलका जीआईडीसी की इकाई के लिए कौन सा धर्म कांटा उपयुक्त है?
कपास की गाँठों, धागे और पीवीसी पाइप के ट्रकों के लिए 40–60 टन क्षमता वाला पिट-लेस स्टील धर्म कांटा उपयुक्त है; लंबाई 16 मीटर, या सबसे लंबा ट्रेलर न समाए तो 18 मीटर रखें। खरीद-बिक्री में उपयोग से पहले लीगल मेट्रोलॉजी सत्यापन कराएँ; सिम्फनी स्टैम्पिंग सपोर्ट देता है।
What decides the cost of a weighbridge in Dholka?
Capacity, length (16 m or 18 m for long pipe trailers), the weighbridge type (pit-less steel, concrete (RCC) or modular), the foundation the soil check calls for, the software and any unmanned option such as RFID, cameras and a boom barrier. Send your longest and heaviest vehicle, photos of the plot and your trucks per day; an engineer replies within one working day.
धोलका में व्यवसाय के लिए धर्म कांटा स्थापित करने से पहले क्या तैयारी करें?
सबसे लंबे और सबसे भारी वाहन का माप लें, प्लॉट पर सीधा प्रवेश और निकास तय करें, और मिट्टी की जाँच के बाद ही फाउंडेशन तैयार करें। फिर उपयुक्त क्षमता और लंबाई का धर्म कांटा स्थापित करें और लीगल मेट्रोलॉजी सत्यापन कराएँ। सिम्फनी 1998 से धर्म कांटे बनाता है और स्टैम्पिंग सपोर्ट देता है। कॉल या व्हाट्सएप: +91 94092 42100।

Tell us your site. We recommend the platform.

Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.

Request the document

Fill in your details once; after a quick e-mail verification the download starts and all other documents unlock.

Include the country code, e.g. +91 or +254.
Security characters

An engineer replies within one working day. We verify your e-mail with a one-time code. By sending, you agree to our privacy notice.

Verify us · credentials you can check

Check the papers before you buy.

Quality systemISO 9001:2015
Cert. No.
3050250909104Q
Issued by
QRO Certification LLP
Valid to
8 Sep 2028
Check at qrocert.org
CE certificate of complianceCE-7070
Directive
2014/32/EU
Issued by
UK Certification & Inspection Ltd
Valid to
8 Sep 2028
Check at ukcertifications.org.uk
Legal MetrologyModel approval & manufacturer licence

Symphony holds a Legal Metrology model approval certificate and a manufacturer licence. Copies are shared with your quotation or tender documents.

How stamping works
Business registrationS.M.F. Enterprise
GSTIN
24AJNPK8047K1ZR
MSME
UDYAM-GJ-01-0025143
Since
1998
Tender documents

Ask for any certificate copy with your quotation: info@symphonyweight.com