Sales +91 94092 42100/Technical +91 97251 68834
Symphony Weighing Leader
Manesar · Haryana

Manesar weighbridges for component plants, coil trailers and logistics gates.

Manesar is a planned industrial township first and a town second. IMT Manesar, the HSIIDC estate on the Delhi–Jaipur highway, runs vehicle assembly, auto-component, sheet-metal and engineering plants, and warehouse parks have followed along the expressway belt around it. Plants here live by delivery slots: sheet steel and forgings come in on a schedule, finished components go out against a dispatch note, and press-shop offcuts and turnings are sold as scrap by weight. A truck that waits at the gate costs the plant money, so the weighbridge has to be fast, accurate and easy to audit. Symphony supplies weighbridges, truck scales and dharam kanta (धर्म कांटा / तौल कांटा) to Manesar, Panchgaon, Naurangpur and Kasan.

Quick answer

An auto-component plant or press shop in IMT Manesar usually fits a 60 MT, 16 m pit-less steel weighbridge with SMFW slips and RFID tags for regular suppliers; a steel coil stockist or forging unit should plan 60–80 MT on 16 m with heavy girders, because a coil loads a few axles hard; a warehouse or third-party logistics operator handling 40-ft container trailers should plan an 18 m platform of 60–100 MT, depending on axle configuration, adding the unmanned gate (RFID, cameras, boom barrier) where trucks arrive at all hours; a scrap or metal-recycling dealer fits 60–80 MT on 16 m in heavy steel or concrete (RCC). Fabrication happens at our Ahmedabad works, so your contractor’s job is limited to the base.

Why Symphony in Manesar

Delivery slots, heavy coils and round-the-clock gates: a platform built to keep up.

  • A gate that keeps movingA pit-less steel platform with separate lanes and a cabin view helps clear delivery trucks quickly at the plant entrance.
  • Unmanned when the plant is notRFID tags, cameras and a boom barrier let regular suppliers weigh themselves in at any hour, with cameras recording each pass.
  • Built for coils and scrapHeavy steel with extra girders and sealed IP68/IP69K load cells holds a steady figure under a coil on a few axles or an uneven scrap load.

Who needs one in Manesar: Vehicle assembly and auto-component plants in IMT Manesar; sheet-metal, press-shop and forging units; steel coil, sheet and aluminium stockists; tool-room and engineering workshops; warehouse and distribution parks; third-party logistics operators; scrap and metal-recycling dealers; packaging and plastics units; cement and building-material suppliers; transporters and public weighing operators.

Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Panchgaon, Naurangpur, Kasan.

Get a quotation

Who we build for in Manesar

Press shops, warehouses and scrap dealers across IMT Manesar and its sheds.

Auto-component plants and press shops

Delivery slots are tight, and a supplier’s coil or forging has to be booked in against the invoice before the bay opens.

Our setup: Our fit: 60 MT on 16 m, pit-less steel, SMFW slips with RFID tags for regular suppliers.

Warehouses and logistics gates

Container trailers and multi-axle trucks pass in all hours, and a human at every gate is slow and costly.

Our setup: Our recommendation: a 60–100 MT platform of 18 m with RFID, cameras and a boom barrier.

Scrap and metal recycling

Offcuts, turnings and baled metal are sold by the kilogram, and an uneven load must still read steadily.

Our setup: Suggested build: 60–80 MT on 16 m in heavy steel or concrete (RCC).

Industrial areas we serve near Manesar
  • IMT Manesar (HSIIDC)vehicle assembly, auto-component, sheet-metal and engineering plants
  • Warehouse parks along the expressway beltlogistics parks, distribution centres and third-party operators
  • Panchgaon and Naurangpurworkshops, yards and transporters
Advice for Manesar sites

Gate lanes, axle ratings and the unmanned option: where a Manesar weighbridge should stand.

A Manesar plant is planned around its gate, so the weighbridge should be planned with it. Inbound trucks carry sheet-steel coils, forgings, aluminium ingots and packaging against a delivery slot, and the stores team needs the gross and tare figure printed against the vehicle number and the supplier before the unloading bay opens. A dependable way to keep the gate moving is a pit-less steel platform with a straight run on both sides, separate inbound and outbound lanes and the cabin placed so that the operator sees the whole platform. Regular suppliers can carry RFID tags, which lets the system recall the stored tare and print the slip quickly, while cameras record each pass and a boom barrier controls the lane; this is the unmanned option and it suits plants that run through the night. A coil is a concentrated load on a few axles, so rating and girder layout under the wheels matter more than its length; we size the build to the axle rating of your heaviest coil trailer. Press-shop offcuts, turnings and rejected components leave as scrap, and loose or baled metal loads the bed unevenly, so heavy steel or concrete (RCC) with sealed IP68/IP69K load cells is the better choice there. Some sheds and warehouse parks in the township are leased, so a tenant with no right to dig has the modular weighbridge, which sits on any hard, level surface such as concrete after a few hours of work. Summer heat on the highway belt is severe, so a shaded, ventilated cabin and a UPS with proper earthing keep the indicator steady.

Recommended forVehiclesCapacityWeighbridgeType
Auto-component plant or press shopCoils, sheets and forgings in, parts out, against delivery slots60 MT16 mPit-less steel with SMFW slips and RFID tags for regular suppliers
Steel coil stockist or forging unitCoil trailers loading a few axles hard60–80 MT16 mHeavy steel, girders reinforced along the wheel path
Warehouse or logistics operator40-ft container trailers and multi-axle trucks60–100 MT18 mConcrete (RCC) or heavy steel, unmanned gate with RFID, cameras and boom barrier
Scrap or metal-recycling dealerOffcuts, turnings and baled metal sold by weight60–80 MT16 mHeavy steel or RCC, IP68/IP69K cells sealed against scrap dust
Tool-room or engineering workshopRaw bar and plate in, finished tooling out40–60 MT12–14 mSteel build, indicator in the tool-room office
Public weighing operator on the highway sidePassing trucks that need a reliable, verifiable weight slip100 MT18 mHeavy steel or concrete (RCC) with ramps on both sides

Starting points only. Send your heaviest truck and daily traffic and we confirm the size.

Your project in Manesar

From the gate layout to the first printed slip: a Manesar weighbridge in six steps.

Six steps for your project in Manesar. Most of the waiting is the foundation curing, so the drawing comes first.

  • 1 · Your traffic in ManesarTell us the heaviest vehicle you weigh (here, typically coils, sheets and forgings in, parts out, against delivery slots), the space at the gate and the daily count. An engineer replies within one working day.
  • 2 · Size and quotationOur usual starting point (auto-component plant or press shop): 60 MT, 16 m weighbridge, Pit-less steel with SMFW slips and RFID tags for regular suppliers. The quotation comes with the foundation drawing.
  • 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the weighbridge arrives.
  • 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
  • 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, SMFW stored tares set up (RFID, cameras and boom barrier where ordered), and Legal Metrology verification supported.
  • 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
FAQ

What Manesar plant managers, warehouse heads and scrap dealers ask first.

Who supplies weighbridges in Manesar?
Symphony Weighing Leader (S.M.F. Enterprise) is a weighbridge maker based in Ahmedabad, working since 1998 under a Legal Metrology model approval and manufacturer licence. A plant, warehouse or scrap yard in IMT Manesar, Panchgaon, Naurangpur or Kasan gets build, fitting and stamping support from the same manufacturer.
What capacity should an IMT Manesar auto-component plant choose?
Most component plants and press shops settle on 60 MT with a 16 m platform. If coil or forging trailers are the heaviest vehicle, we move to 60–80 MT and add girders under the wheel path, based on the axle rating of that trailer.
Can regular suppliers weigh without stopping at the cabin?
Yes. A tagged vehicle is recognised at the platform, its stored tare is applied and the slip is printed without an operator at the cabin; cameras log the pass and the boom barrier can be set to lift only for a valid tag. That is our unmanned option, suited to plants that take deliveries around the clock.
Why do steel coils need a stronger platform?
A coil sits on a few axles of the trailer, so the load reaches the platform in a concentrated way. We choose the rating and the girder layout from the axle rating of your heaviest coil trailer, not only from the gross weight.
How should a Manesar warehouse plan for container trailers?
A 40-ft container trailer is best weighed in one pass on an 18 m platform, rated 60–100 MT depending on the axle configuration. A straight run on both sides, separate inbound and outbound lanes and a cabin with a clear view complete the layout.
Can the weighbridge print a slip that the stores desk can file straight away?
Yes. Vehicle number, party, material and challan field sit on the same slip, and party-wise reports spare the stores desk and accounts from re-keying delivery data.
Is a modular weighbridge possible for a leased shed in IMT Manesar?
Yes. A tenant with no right to excavate can choose the modular type; once a hard, level surface such as concrete is ready, fitting takes hours, and it can go with the business at the end of the lease.
How soon can a Manesar plant start weighing after ordering?
Counting from a commercially cleared order with PO, dispatch takes about two weeks. After it come fitting, calibration and stamping support on your site. Warranty is one year for the equipment and 25 years for RCC structure (T&C apply).
What decides the cost of a weighbridge in Manesar?
Three choices: how long and how heavy your trailers are (container, coil or tipper), how the gate should run (manned cabin or unmanned with RFID, cameras and a barrier) and what the yard allows. A 60 MT, 16 m platform for a component plant is a different quote from a 60–100 MT, 18 m platform with an unmanned gate for a logistics park. Tell us the trailer, the gate layout and the capacity you have in mind; WhatsApp +91 63525 86656 or call +91 94092 42100.
मानेसर में प्लांट या गोदाम के लिए वेब्रिज स्थापित करते समय क्या देखें?
सबसे पहले यह देखिए कि आपके गेट पर कौन-सी गाड़ी सबसे ज़्यादा और कितनी बार आती है। ऑटो-कंपोनेंट प्लांट के लिए 60 टन क्षमता का 16 मीटर पिट-रहित स्टील प्लेटफ़ॉर्म, और कंटेनर ट्रेलर वाले गोदाम के लिए 60 से 100 टन का 18 मीटर प्लेटफ़ॉर्म सामान्यतः उपयुक्त रहता है। नियमित आपूर्तिकर्ताओं के लिए आरएफआईडी वाला अनमैन्ड विकल्प उपलब्ध है। वर्ष 1998 से स्थापित सिम्फनी निर्माण के साथ स्टैम्पिंग सहयोग भी देती है। फ़ोन +91 94092 42100।

Tell us your site. We recommend the platform.

Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.

Request the document

Fill in your details once; after a quick e-mail verification the download starts and all other documents unlock.

Include the country code, e.g. +91 or +254.
Security characters

An engineer replies within one working day. We verify your e-mail with a one-time code. By sending, you agree to our privacy notice.

Verify us · credentials you can check

Check the papers before you buy.

Quality systemISO 9001:2015
Cert. No.
3050250909104Q
Issued by
QRO Certification LLP
Valid to
8 Sep 2028
Check at qrocert.org
CE certificate of complianceCE-7070
Directive
2014/32/EU
Issued by
UK Certification & Inspection Ltd
Valid to
8 Sep 2028
Check at ukcertifications.org.uk
Legal MetrologyModel approval & manufacturer licence

Symphony holds a Legal Metrology model approval certificate and a manufacturer licence. Copies are shared with your quotation or tender documents.

How stamping works
Business registrationS.M.F. Enterprise
GSTIN
24AJNPK8047K1ZR
MSME
UDYAM-GJ-01-0025143
Since
1998
Tender documents

Ask for any certificate copy with your quotation: info@symphonyweight.com