Faridabad weighbridges for forging shops, foundries and steel yards.
Faridabad is one of Haryana's oldest industrial towns. Its numbered industrial sectors, NIT and Ballabgarh hold forging shops, foundries, tractor and auto-component makers, electrical and rubber goods factories and fabrication works, many of them running for decades. Steel arrives as billets, bars and sheet, leaves as castings, forgings and machined parts, and the turnings and scrap go back out by truck. Symphony supplies weighbridges, truck scales and dharam kanta or tol kanta (धर्म कांटा / तौल कांटा) across Faridabad district.
A forging or casting unit in Faridabad needs a 60–80 MT, 16–18 m weighbridge (dharam kanta) for steel and scrap trucks; an engineering or auto-component maker 40–60 MT of 16 m; a steel stockist 60–80 MT of 18 m for bar and sheet trailers. Symphony builds the truck scale in Ahmedabad.
Steel in, castings out, scrap back: a printed slip for every leg.
- Metal in, metal outSMFW slips with party and challan field for steel in, castings out and scrap returned.
- Rated for heavy axlesCapacity chosen by the heaviest axle as well as the gross, for billet and casting trucks.
- Replacing an old weighbridgeSend photos of the old pit first; an engineer advises whether to adapt it or move to pit-less on new pedestals.
Who needs one in Faridabad: Forging and casting units, tractor and auto-component makers, electrical goods, rubber and engineering factories in the industrial sectors and IMT Faridabad, sheet-metal and fabrication works, steel stockists and scrap dealers, building-material and RMC yards, and grain trade at the Ballabgarh mandi.
Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Ballabgarh, Tigaon, Mohna, Chhainsa, Dayalpur, Sikri, Badkhal, Dhauj, Pali, Kheri Kalan.
Forging units, engineering makers and steel stockists.
Forging and casting units
Steel billets and foundry scrap are bought by weight and castings are sold by weight, so the yield of every heat depends on two honest numbers.
Our setup: A 60–80 MT, 16–18 m concrete (RCC) or pit-less steel weighbridge rated for heavy axle loads, with SMFW reports by party.
Engineering and auto-component makers
Sheet, bar and bought-out parts arrive from many suppliers and finished parts leave for assembly plants, so inbound and outbound weights both need a record.
Our setup: A 40–60 MT, 16 m pit-less steel weighbridge that fits a narrow gate area, with slips for every truck.
Steel stockists and scrap dealers
Bars and sheet arrive on long trailers and leave in smaller lots, and scrap is resold several times, each time by weight.
Our setup: A 60–80 MT, 18 m pit-less steel weighbridge for full-length trailers, with stored tares for regular trucks.
- Industrial sectors of Faridabad (Sectors 24, 25, 27 and 58–59)forging, casting, engineering and electrical units
- IMT Faridabad (HSIIDC)engineering and manufacturing units
- Ballabgarh industrial areaauto components, fabrication and small manufacturing
- NIT Faridabadengineering works and small factories
An old weighbridge by the gate? Check the pit before you replace it.
Many of Faridabad's factories stand in industrial sectors laid out decades ago, where plots are full, lanes are narrow and an old weighbridge may already sit in a worn pit by the gate. Before replacing it, have the old pit and its drainage checked: send photos and the pit size, and an engineer will advise whether it can be adapted to the foundation drawing for the new weighbridge; a cracked or waterlogged pit is usually better replaced by a pit-less steel weighbridge on new pedestals. Check that trucks can line up straight on and off the weighbridge, because a trailer that turns on or off the weighbridge pushes it sideways against its stoppers and can leave an axle off the platform. Billets and castings are dense, so a full load sits on a short length of the truck bed; check the heaviest axle as well as the gross weight when choosing the capacity. Summer heat and dust and the monsoon rain call for sealed IP67/IP68 load cells and a closed junction box.
| Recommended for | Vehicles | Capacity | Weighbridge | Type |
|---|---|---|---|---|
| Forging or casting unit | Trucks with billets, scrap and castings | 60–80 MT | 16–18 m | Concrete (RCC) or pit-less steel |
| Engineering or auto-component maker | Trucks with steel and finished parts | 40–60 MT | 16 m | Pit-less steel |
| Steel stockist or scrap dealer | Bar and sheet trailers, scrap trucks | 60–80 MT | 18 m | Pit-less steel |
| Building-material or RMC yard | Tippers and bulkers | 60–80 MT | 16 m | Concrete (RCC) |
Starting points only. Send your heaviest truck and daily traffic and we confirm the size.
From the site photos to the first billet slip.
Six steps for your project in Faridabad. Most of the waiting is the foundation curing, so the drawing comes first.
- 1 · Your traffic in FaridabadTell us the heaviest vehicle you weigh (here, typically trucks with billets, scrap and castings), the space at the gate and the daily count. An engineer replies within one working day.
- 2 · Size and quotationOur usual starting point (forging or casting unit): 60–80 MT, 16–18 m weighbridge, Concrete (RCC) or pit-less steel. The quotation comes with the foundation drawing.
- 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the weighbridge arrives.
- 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
- 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
- 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
Faridabad forging and engineering questions.
Who supplies weighbridges in Faridabad?
Which weighbridge suits a forging unit in Faridabad?
फ़रीदाबाद में फ़ोर्जिंग या कास्टिंग इकाई के लिए कौन सा धर्म कांटा उपयुक्त है?
Can an old weighbridge pit in Faridabad be reused?
What decides the cost of a weighbridge in Faridabad?
फ़रीदाबाद में फ़ैक्टरी के लिए नया धर्म कांटा स्थापित करने से पहले क्या जाँचें?
Tell us your site. We recommend the platform.
Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.