
Sinnar weighbridges for MIDC units, market yards and steel stockists.
Sinnar is a taluka town in Nashik district, set on the Nashik–Pune highway where a large MIDC industrial area, a busy vegetable and onion market and a long string of roadside transport yards all feed the same few gates. Engineering shops, casting and fabrication units and electrical makers at the Sinnar MIDC estates take in steel and send out finished parts by the truckload, while farmers from the surrounding villages bring tomato, onion and other vegetables to the market committee yard. Symphony supplies weighbridges, truck scales and dharam kanta (धर्म कांटा / वजन काटा) to Sinnar and its estates.
A Sinnar engineering or casting unit usually settles on a 60 MT, 14 m pit-less steel weighbridge for steel bars, coils and finished parts going in and out; a vegetable or onion trader at the market yard fits 40 MT on 12 m, with a slip for every truck or tractor-trolley; a metal stockist or builder's yard wants 80 MT on 16 m in heavy steel or concrete (RCC); and a public weighbridge on the highway side takes 100 MT on 18 m. The platform is made in our Ahmedabad factory and is ready to dispatch about 2 weeks after a commercially cleared PO, so levelling the plot and curing the pedestals can run alongside.
A gate record that matches the invoice: one printed slip for every bar, coil and trolley.
- One weighbridge, two tradesA straight approach with two queueing lanes lets an estate unit and a market trader use the same platform without blocking the road.
- Slips that match the invoiceSMFW prints the vehicle, party, material and time on every slip, so a steel purchase or a dispatch can be checked months later.
- Ready for rented landThe modular weighbridge needs no foundation and installs within hours on a hard, level surface, then moves with you.
Who needs one in Sinnar: Engineering, auto-component, casting, fabrication and electrical units at the Sinnar MIDC estates at Musalgaon and Malegaon; steel and metal stockists who feed them; onion, tomato and vegetable traders and commission agents around the Sinnar market; building-material and aggregate suppliers; goods transporters on the highway; and public weighing operators.
Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Musalgaon, Malegaon (Sinnar) MIDC, Wavi, Nandurshingote, Dubere.
Engineering units, tomato and onion traders and steel stockists across the Sinnar estates and its market yard.
Casting and fabrication units
Steel enters by the tonne and castings leave by the tonne, so the gate record is the document that settles the invoice.
Our setup: Our fit: 60 MT, 14 m, pit-less, with SMFW slips split by party and material.
Tomato and onion market traders
Lots arrive in tractor-trolleys and small trucks in a rush, and the seller wants to read the weight from the cab.
Our setup: Our fit: 40 MT, 12 m, a big display facing the cab and a fast slip for each trolley.
Steel and building-material stockists
Bars, pipes and aggregate move on long trailers and in tippers, and weight is the basis of the bill.
Our setup: Our fit: 80 MT, 16 m, heavy steel or RCC, one printed slip per load.
- Sinnar MIDC at Musalgaonengineering, auto-component, casting and electrical units
- Malegaon MIDC (Sinnar)industrial units
- Sinnar market areatomato, onion and vegetable traders and commission agents with their own yards
- Nashik–Pune highway sidetransport yards, steel stockists and building-material suppliers
Soil, monsoon runoff and rented land: where a Sinnar weighbridge should stand.
Sinnar sits between two very different weighing jobs. Inside the MIDC estates, the question is accuracy and paperwork: a unit buying bar, plate or coil by the tonne wants the gate record to match the invoice, and a unit sending castings or fabricated parts wants the dispatch weight written down before the truck leaves. That is a job for a steady, well-calibrated platform with a slip that prints the vehicle, the party, the material and the time. At the market yard the job is speed and clarity: at busy arrival times tractor-trolleys and small trucks queue, the seller reads the display from the cab, and the trader settles on the printed figure. A single weighbridge can often serve both if it is placed on a straight approach with room for two lanes of queueing off the road. Soil varies from plot to plot, so the footing drawing follows your plot once you have a soil report, and monsoon runoff makes it sensible to slope the approaches away from the platform and put the indicator cabin on higher ground. A yard on rented land can take the modular weighbridge instead, which is placed within hours on a hard, level concrete surface with no foundation work. Plan the pour and the cabling in the fortnight your platform is being built, and the first weighment can follow the day it arrives.
| Recommended for | Vehicles | Capacity | Weighbridge | Type |
|---|---|---|---|---|
| Engineering, casting or electrical unit | Steel bar, plate and coil in; parts and castings out | 60 MT | 14 m | Pit-less steel on pedestals, SMFW slips by party and material, stamping support |
| Onion, tomato or vegetable trader | Tractor-trolleys and small trucks of tomato and onion | 40 MT | 12 m | Pit-less steel with a cab-side display and a fast printed slip |
| Metal or steel stockist | Long bars and coils on trailers, paid by the tonne | 80 MT | 16 m | Heavy pit-less steel or RCC, with a printed slip for each trailer |
| Builder's or aggregate yard | Tippers and mixers weighed by the trip | 60 MT | 14–16 m | Pit-less steel or concrete (RCC) |
| Public weighbridge on the highway side | Trucks, trailers and tankers needing a printed slip | 100 MT | 18 m | Concrete (RCC) or heavy pit-less steel with a printed slip and stamping support |
Starting points only. Send your heaviest truck and daily traffic and we confirm the size.
From the plot check to the first printed slip: a Sinnar weighbridge in six steps.
Six steps for your project in Sinnar. Most of the waiting is the foundation curing, so the drawing comes first.
- 1 · Your traffic in SinnarTell us the heaviest vehicle you weigh (here, typically steel bar, plate and coil in; parts and castings out), the space at the gate and the daily count. An engineer replies within one working day.
- 2 · Size and quotationOur usual starting point (engineering, casting or electrical unit): 60 MT, 14 m weighbridge, Pit-less steel on pedestals, SMFW slips by party and material, stamping support. The quotation comes with the foundation drawing.
- 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the weighbridge arrives.
- 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
- 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
- 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
What Sinnar's manufacturers, market traders and stockists ask first.
Who supplies weighbridges in Sinnar?
What size of weighbridge suits a Sinnar MIDC unit?
Can one weighbridge serve a trading yard and a store?
Do we need a pit?
How long does the work take?
What about monsoon rain?
Can the gate run unmanned?
What decides the cost of a Sinnar weighbridge?
सिन्नर में उद्योग या मंडी के लिए धर्म कांटे का चयन कैसे करें?
Tell us your site. We recommend the platform.
Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.
