
Alang and Sosiya weighbridges for the plot gate, the dealer's yard and the mill.
The Alang–Sosiya yard on the Gulf of Khambhat shore, in Bhavnagar district, is a working ship-breaking beach: vessels are run onto the tidal flat at the big high tides and cut, plot by plot, into plate, sections, pipes, cable, engines and furnishings. Very little is thrown away. Steel plate goes to re-rolling mills, melting scrap to furnaces, and the engines, pumps and cabin fittings to dealers' shops around Alang and Sosiya. Because every one of those lots is priced by weight, a weighbridge works as the plot's cash register. Symphony supplies weighbridges, truck scales and dharam kanta (धर्म कांटा / tol kanta) for plot holders, dealers and haulage operators across Alang, Sosiya and the wider Alang area.
Alang plot holders usually choose a 100 MT, 18 m steel-cum-RCC weighbridge so that a loaded plate trailer stands on the platform in one piece; a melting-scrap buyer fits 60–80 MT on 16 m in concrete (RCC); a second-hand machinery or furniture dealer is well served by 30–40 MT on 10–12 m. Concrete resists salt air best, and every platform sits on sealed IP68/IP69K load cells. Steelwork is built in Ahmedabad while the pedestals are cast on your plot, and the platform is ready to leave about 2 weeks after a commercially cleared order with PO.
Whatever leaves the beach is sold by weight: the plot's slip has to hold at the mill.
- Plate that rides on a few axles100 MT on 18 m with heavy cross-members, so a loaded trailer stands fully on the platform and the axle load is shared across every cell.
- Salt, rust scale and sparksA concrete (RCC) platform, sealed IP68/IP69K cells, armoured cable runs and a cabin set well away from the gas-cutting.
- The plot and the mill reading one weightStamped Class III, a clean gap and an SMFW slip for every lot that leaves the beach.
Who needs one in Alang: Plot holders and cutting contractors at Alang and Sosiya; buyers of re-rollable plate for re-rolling mills; furnace and foundry buyers of melting scrap; second-hand dealers in engines, generators, pumps, pipes, cable drums and ship's furniture; non-ferrous traders in copper, brass and aluminium; heavy-haul and crane-trailer transporters; and the welding, gas and tyre workshops that keep the yard moving.
Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Sosiya, Trapaj, Talaja, Manar.
Plot holders, scrap buyers and dealers from the Alang beach to the dealer's gate.
Plot holders and cutting contractors
A vessel leaves the beach in hundreds of loads over many weeks, each sold by weight, and every buyer expects the plot's slip to match his own mill's.
Our setup: A 100 MT, 18 m steel-cum-RCC weighbridge on raised pedestals, plate loaded beside the platform, and SMFW slips that print vehicle, buyer, material and net weight.
Melting-scrap and non-ferrous traders
Sorted lots of copper, brass, aluminium and mixed scrap are sold lot by lot, and a small error becomes real money.
Our setup: A stamped Class III weighbridge of 60 MT on 16 m for truck lots, gap kept clean, with SMFW lot-wise records; very small lots are better checked on a separate platform scale.
Second-hand dealers and fittings shops
Engines, generators, pumps, pipes and cable drums leave on smaller trucks, priced by weight or by lot, many times a day.
Our setup: A 30–40 MT, 10–12 m pit-less or modular weighbridge, with a printed slip for every sale and a daily total for the accounts.
Heavy-haul operators and crane-trailer owners
Trailers carrying plate and large fabrications are paid on weight, and the shipper wants proof of what was loaded.
Our setup: A 100 MT, 18 m steel-cum-RCC weighbridge at the yard, with the unmanned option for vehicles that arrive when the office is closed.
- Alang plotsship recycling: plate, sections, pipes and scrap
- Sosiya plotscutting contractors, scrap buyers and haulage
- Alang and Sosiya dealersengines, pumps, pipes, cable and furniture
- Trapajtransport and haulage operators
- Talajatown markets and haulage offices
Tides, salt and plate on a few axles: where an Alang weighbridge should stand.
A trailer of cut plate is among the most punishing loads a weighbridge meets, and Alang sends them out all day. Plate rides on a few axles, so the weight under each tyre is far higher than the total on the slip suggests, and a platform is judged by how it takes the first axle on, not only by its rated capacity. For the plots we therefore recommend 100 MT on 18 m, with the platform built steel-cum-RCC or fully in concrete (RCC) and heavy cross-members under every load cell. Rule one on the yard is to load beside the platform and weigh afterwards, because a magnet crane that drops plate on a truck standing on the scale throws a shock into the cells that no rating is meant to absorb. Rule two is the salt. The shore air leaves a film of salt every day of the year, and the cutting fills it with rust scale and burnt-metal dust, so a painted steel top ages faster here than in most places in the state. Concrete resists it far better and carries a 25-year structural warranty (T&C apply), which leaves only the cells, cables and junction box to protect: they are sealed IP68/IP69K, run in armoured conduit and kept well clear of the gas-cutting. The land beside the beach is low, saline and wet, and the spring tides lift the water table, so we do not promote a pit here. The platform stands on raised pedestals with a drain that rain and flying scale will not easily block, and the cabin and indicator are lifted above the highest water line. The buyer's mill weighs the same lot again, so the plot's figure has to match: a stamped Class III weighbridge, re-verified on schedule, a gap swept free of slag, and an SMFW slip with vehicle, buyer, material and net weight. The dealers around the yard run another business, dozens of smaller lots a day on 6- and 10-wheel trucks and tempos, where 40 MT on 12 m is plenty and a modular platform can go onto a level concrete forecourt within hours. Strong coastal winds in the monsoon and cyclone season and power cuts after storms are real here, so keep a UPS for the SMFW computer, proper earthing and surge protection at the cabin. A yard photograph, the heaviest trailer you expect and the plot layout are enough for us to draw the foundation. Where the weighbridge stands matters as much as how it is built. Put it on the plot's exit route, before the public road, with a straight run of about a trailer's length on each side, so that an 18 m platform never makes a truck reverse with a load of plate. Keep a hard standing outside the gate for trucks waiting their turn, so that the platform is not blocked by vehicles that have not been called. Plate that is wet after rain or sea spray weighs more than dry plate, and cut sections can hold water, so the date and the weather are worth a line in the record. The plot office will want a lot register: which cutting gang, which part of the vessel, which buyer, which truck. SMFW stores vehicle number, party, material and weights for every trip and prints the report for a week or a month, so the plot's own ledger and the buyer's invoices can be matched against it. Dealers whose yards are tight can choose a shorter platform with approaches kept clear of the road.
| Recommended for | Vehicles | Capacity | Weighbridge | Type |
|---|---|---|---|---|
| Ship-recycling plot | Plate trailers, crane-trailers and multi-axle trucks | 100 MT | 18 m | Steel-cum-RCC or concrete (RCC), stamped |
| Plot yard for sections, pipes and light scrap | Tippers and 10-wheel trucks | 60 MT | 16 m | Concrete (RCC), sealed load cells |
| Melting-scrap buyer at the yard gate | Tippers and multi-axle trucks | 60–80 MT | 16 m | Concrete (RCC) or coated pit-less steel |
| Engine, pump and pipe dealer near the yard | 6- and 10-wheel trucks | 40 MT | 12 m | Pit-less steel, or modular on a hard concrete forecourt |
| Furniture, fittings and cable dealer | Tempos and small trucks | 30 MT | 9–10 m | Modular or pit-less steel, stamped |
| Heavy-haul transporter or shared weighbridge | Long trailers in a steady stream | 100 MT | 18 m | Steel-cum-RCC, unmanned option |
Starting points only. Send your heaviest truck and daily traffic and we confirm the size.
From a yard photograph to the first stamped plate trailer: an Alang weighbridge in six steps.
Six steps for your project in Alang. Most of the waiting is the foundation curing, so the drawing comes first.
- 1 · Your traffic in AlangTell us the heaviest vehicle you weigh (here, typically plate trailers, crane-trailers and multi-axle trucks), the space at the gate and the daily count. An engineer replies within one working day.
- 2 · Size and quotationOur usual starting point (ship-recycling plot): 100 MT, 18 m weighbridge, Steel-cum-RCC or concrete (RCC), stamped. The quotation comes with the foundation drawing.
- 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the weighbridge arrives.
- 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
- 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, SMFW stored tares set up (RFID, cameras and boom barrier where ordered), and Legal Metrology verification supported.
- 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
Questions Alang plot holders, scrap buyers and haulers ask us.
Who makes weighbridges for the Alang–Sosiya yard?
What size weighbridge should an Alang plot choose?
Why is a pit not recommended at Alang?
Can the crane load plate while the truck stands on the weighbridge?
How long does an Alang weighbridge take to arrive?
Where on an Alang plot should the weighbridge stand?
Does a dealer near the yard need a full 18 m platform?
How is an Alang weighbridge priced?
What happens when the plot and the mill record different weights?
अलंग के प्लॉट धारक या स्क्रैप खरीदार को धर्म कांटा लगवाते समय क्या देखना चाहिए?
Tell us your site. We recommend the platform.
Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.
