
Hisar weighbridges for steel units, cotton mills and mandi traders.
Hisar is a town of steel, cotton and grain. The industrial area has long held steel re-rolling, galvanising and pipe units; the cotton that arrives from the surrounding tehsils from October feeds ginning and spinning mills; and the grain market handles wheat, mustard, gram and bajra through the year, alongside the cattle feed and dairy trade that the Murrah buffalo belt sustains. Every one of these trades pays by weight, so a printed figure at the gate is what settles an invoice. Symphony supplies weighbridges, truck scales and dharam kanta (धर्म कांटा / तौल कांटा) to Hisar, Hansi, Barwala, Adampur and Uklana.
A steel re-rolling, galvanising or pipe unit in the Hisar industrial area usually fits an 80–100 MT, 18 m weighbridge in heavy steel or concrete (RCC), because bundles, coils and billets arrive on long trailers; a cotton ginning or pressing mill needs 60–80 MT on 16 m for bale trucks; a mandi trader dealing in grain, mustard or cattle feed fits 60 MT on 16 m, with SMFW slips that list each party; dairies and cold stores can settle on 40–60 MT over 12–14 m; a public yard on the highway should plan 100 MT over 18 m. We fabricate at Ahmedabad and send a drawing for your contractor’s base work.
Long steel trailers, high-stacked cotton and dry summer heat: a platform made for all three.
- Sized for long steel trailersAn 18 m platform with reinforced girders takes a billet or pipe trailer in one pass and keeps the reading steady.
- Ready for the cotton rushA 16 m pit-less platform weighs a whole bale truck at once, which keeps the queue at the ginning mill moving.
- Built for dry heat and dustSealed IP68/IP69K load cells, a shaded cabin and a ventilated indicator box suit the Hisar summer and the mill-scale dust.
Who needs one in Hisar: Steel re-rolling, galvanising, pipe and stainless-steel units in the Hisar industrial area; scrap and billet traders; cotton ginning and pressing mills and spinning units; grain, mustard and cotton traders at the Hisar, Hansi and Barwala market yards; cattle-feed, oil and flour mills; dairy and Murrah buffalo-related trade; seed and agri-input dealers; cold stores and godowns; cement and building-material suppliers; truck owners and public weighing yards.
Also called a dharam kanta (धर्म कांटा), truck scale or weigh bridge. We also serve Hansi, Barwala, Adampur, Agroha, Uklana, Narnaund.
Re-rolling mills, ginning units and grain traders across Hisar, Hansi and Barwala.
Steel re-rolling and galvanising
Billets and coils come in and bars and pipe go out on trailers that can run the whole length of the bed, and each lot is billed by weight.
Our setup: Our fit: 80–100 MT on 18 m, heavy steel or concrete (RCC), girders reinforced along the wheel path.
Cotton ginning and pressing
Bale trucks stack high in season, and a mill that weighs in one pass clears the gate before the next truck arrives.
Our setup: Our pick: 60–80 MT on 16 m, party-wise SMFW slips.
Mandi grain, mustard and cattle feed
The rush follows each harvest and tractor-trolleys and trucks arrive together.
Our setup: Suggested build: 60 MT on 16 m, pit-less steel with a shaded cabin.
- Hisar industrial areasteel re-rolling, galvanising, pipe and stainless-steel units
- Hisar, Hansi and Barwala market yardswheat, mustard, gram, bajra and cotton
- Ginning and pressing belt of Hisar districtcotton ginning, pressing and spinning mills
- Adampur and Uklanaagri traders, cattle-feed and oil mills and godowns
Axle ratings, mill dust and the cotton queue: where a Hisar weighbridge should stand.
The first decision for a Hisar site is which of its two big trades the platform will serve. In a steel unit the vehicles are long: billets, bars, coils and galvanised pipe come on flat-bed and multi-axle trailers, scrap arrives loose or baled, and the load sits on a short length of the bed. We therefore size the platform for the axle rating of the heaviest trailer and add girders under the wheel path, and we choose heavy steel or concrete (RCC) with sealed IP68/IP69K load cells, because mill scale, dust and heat punish a light build. In the cotton season, from October into the winter, bale trucks queue at the ginning mills and the market yards, and bulky loads reach a high stack on the trailer, so a 16 m platform that takes the whole vehicle in one pass keeps the queue short. A grain or mustard trader sees the rush after each harvest, with tractor-trolleys and trucks together, and needs the cabin in clear view of the platform and an SMFW slip printed quickly. Hisar summers are hot and dry, with sandy and loamy ground, so the soil note from your contractor comes first, and pedestals are laid out only after it, and a shaded cabin with a ventilated indicator box protects the electronics. A pit-less steel weighbridge on pedestals needs little digging and is quick to commission. A tenant in a leased shed can choose the modular weighbridge, which goes onto a hard, level surface such as concrete within hours. On the highway side a public weighing yard needs a ramp at both ends, so trucks can pass through in either direction.
| Recommended for | Vehicles | Capacity | Weighbridge | Type |
|---|---|---|---|---|
| Steel re-rolling, galvanising or pipe unit | Billets, coils, bundles and pipe on long trailers | 80–100 MT | 18 m | Heavy steel or concrete (RCC) with girders reinforced along the wheel path |
| Cotton ginning or pressing mill | Bale trucks stacked high in season | 60–80 MT | 16 m | Pit-less steel with SMFW slips by party |
| Grain, mustard or cattle-feed trader at the mandi | Tractor-trolleys and trucks after each harvest | 60 MT | 16 m | Pit-less steel with the indicator in a shaded cabin |
| Scrap and billet dealer | Loose scrap and billets bought by the tonne | 60–80 MT | 16 m | RCC or heavy steel; sealed IP68/IP69K cells and a rating well above the heaviest lot |
| Dairy, cold store or godown | Mixed small and medium trucks | 40–60 MT | 12–14 m | Steel build, indicator in the stores office |
| Public weighing operator on the highway side | Trucks that need a printed weight slip | 100 MT | 18 m | Heavy steel or RCC with a ramp at either end |
Starting points only. Send your heaviest truck and daily traffic and we confirm the size.
From the soil note to the first printed slip: a Hisar weighbridge in six steps.
Six steps for your project in Hisar. Most of the waiting is the foundation curing, so the drawing comes first.
- 1 · Your traffic in HisarTell us the heaviest vehicle you weigh (here, typically billets, coils, bundles and pipe on long trailers), the space at the gate and the daily count. An engineer replies within one working day.
- 2 · Size and quotationOur usual starting point (steel re-rolling, galvanising or pipe unit): 80–100 MT, 18 m weighbridge, Heavy steel or concrete (RCC) with girders reinforced along the wheel path. The quotation comes with the foundation drawing.
- 3 · Foundation on siteYour civil contractor builds the concrete pedestals to our drawing; we can check the levels before the weighbridge arrives.
- 4 · Fabrication and dispatchBuilt and tested in our Ahmedabad workshop; dispatch in about 2 weeks from a commercially cleared order with PO, then delivered and placed on your foundation.
- 5 · Installation and calibrationWeighbridge placed, load cells and indicator connected and calibrated, slip printing set up, and Legal Metrology verification supported.
- 6 · AMC and serviceAMC, breakdown visits, calibration and annual re-verification support from our technical desk, so the weighbridge stays accurate for years.
What Hisar mill owners, traders and scrap dealers ask first.
Who supplies weighbridges in Hisar?
What capacity should a Hisar steel re-rolling or galvanising unit choose?
Why does a cotton mill need a 16 m platform?
Does the heat and dust of Hisar affect the weighbridge?
Can the slip carry the party and material for a mandi trader?
What should a scrap dealer in Hisar know before choosing a platform?
Is a modular weighbridge possible for a rented shed in the Hisar industrial area?
How soon can a Hisar unit start weighing after ordering?
What decides the cost of a weighbridge in Hisar?
हिसार में स्टील यूनिट या कपास मिल के लिए वेब्रिज चुनते समय क्या देखें?
Tell us your site. We recommend the platform.
Send a site photo, vehicle size and daily vehicle count. An engineer replies within one working day.
